PRODUCTS CENTER

Preformed Custom Pavement Colorful Marking Signs

Preformed Custom Pavement Colorful Marking Signs

Pre-formed coloured floor markings can be produced in different sizes, shapes and colours.

关键词:

Coloured ground signs

电话

Product details

  

Product Information

Brand: Color Road

Color:

            Inlaid: two-color, three-color, four-color, multi-color

            Uv printing post-processing: Custom any color

Pavement Marking Colorful Signs

(Reflective surface&self-adhesive)

Inlaid

Thickness: 1.8mm

Black White Red Yellow Blue Green 

Pavement Marking Colorful Signs

(Reflective surface&self-adhesive)

Uv printing post-processing

Thickness: 1.8mm

Custom(any color)

Pavement Marking Colorful Signs

(Smooth surface&self-adhesive)

Inlaid

Thickness: 1.3mm

Black White Red Yellow Blue Green 

Pavement Marking Colorful Signs

(Smooth surface&self-adhesive)

Uv printing post-processing

Thickness: 1.3mm

Custom(any color)

 

Product Features

--Pre-formed colored ground signs can be processed and produced into different sizes, shapes and colors of colored ground signs.

--Applicable to various road surfaces such as concrete, asphalt, cement, marble, etc., and walls of various materials.

--Can be made into various kinds of marking lines, arrows, words, patterns, colored road markings, colored three-dimensional signs, pipeline signs and other colored ground markings.

--Depending on the condition of the road surface, traffic flow, and installation, the service life can be at least 2 years.

 

Product application cases

 

Square two-colour ground speed sign

 

Dimensional deceleration signs

 

Oval speed limit signs (three colours)

 

Scenic-colored ground signs

Instructions:

1. The pavement marking tape without adhesive backing is commonly used in special environments and special materials, using special glue, such as two-component AB glue, 502 glue, etc.


2. The products with adhesive backing can be divided into ground brush primer and ground primer without brush according to the usage:

  • Without brush primer on the ground: It can be directly applied to smooth and flat surfaces without applying primer when used indoors, on outer pavement, and on various walls of place such as workshops, exhibition halls, squares, safety islands of toll stations, where few vehicles run over, it only needs rip off the isolated paper on the back of the product and sticks it directly to the joint surface. And its life can be 5 years to the longest.
  • Brush primer on the ground: It should be applied with primer on uneven surfaces or walls(e.g., Pattex Contact Adhesive, Maxbond UL 1603HFR-HS). The amount of primer required depends on the smoothness of the bonding surface, approximately 1 kilogram per 3 to 5 square meters. Please refer to the construction instructions when using the primer.

Prev: None

Next: None

Online
Message


If you have any suggestions or feedback about our company, please fill in the relevant information on this page and submit it. Our staff will contact you in a timely manner, or please call us directly.

电话

Submit