PRODUCTS CENTER

Preformed Permanent Pavement Marking Tapes (Reflective Surface)
Preformed Permanent Pavement Marking Tapes (Reflective Surface)

Preformed Permanent Pavement Marking Tapes (Reflective Surface)

Preformed Reflective Permanent Pavement Marking Tapes are a new type of road traffic marking that can be directly installed on roads. it combines flexible polymer,high-refractive glass beads, wear-resistant layers, substrates, release film, and other components.

关键词:

Engineering reflective marking tape

电话

Product details

Product Information

Brand: Color Road

Item No.:L5010X(without adhesive backing),L5011X(with adhesive backing)

Color: white, yellow, red, blue, black, green

Product Features

--Preformed reflective marking tape, which can be made into any specification according to customer requirements.

--The base material and the product's surface have glass beads with good reflective and anti-slip properties. It also has strong wear resistance, good weather resistance, and durability.

--Applicable to concrete, asphalt, cement, marble, epoxy floor, and other road surfaces and walls of various materials.it is convenient and fast construction and so on. Widely used in various highways and graded roads.

--Can be made into various marking lines, arrows, words, patterns, colored sign markings on road surfaces, colored three-dimensional signs, and pipeline signs.

--Depending on the condition of the road surface, traffic flow, and installation, the service life can be at least 2 years.

Product size reference chart

Product number Standard Length(m) Standard Width(cm) Thickness(mm) Weight(±10%) Conventional packaging Adhesive
L5010X 40M 5,10,15,20, within 100 customizable 1.3-1.8MM 2.2kg/sqm 300*300*300MM without adhesive backing
L5011X 40M 5,10,15,20, within 100 customizable 1.6-2.2MM 2.4kg/sqm 300*300*300MM with adhesive backing

 

Technical Indicators:

Properties

Typical data

Unit

Test Methods

L50111

L50112

________

________

Color

white

yellow

________

________

Thickness

1.8

1.8

mm

GB/T 7125

Water resistance

pass

pass

________

GB/ T24717

Acid resistance

pass

pass

________

GB/T 24717

Wear-resistant

40

40

mg

GB/T24717

Retroreflection

>250; >500

>175; >300

mcd/m 2 /lux

GB/T24717

Minimum adhesion

25

25

N/25mm

GB/T24717

Anti-skid value

45

45

BPN

GB/T24717

Instructions:

1. The pavement marking tape without adhesive backing is commonly used in special environments and special materials, using special glue, such as two-component AB glue, 502 glue, etc.


2. The products with adhesive backing can be divided into ground brush primer and ground primer without brush according to the usage:

  • Without brush primer on the ground: It can be directly applied to smooth and flat surfaces without applying primer when used indoors, on outer pavement, and on various walls of place such as workshops, exhibition halls, squares, safety islands of toll stations, where few vehicles run over, it only needs rip off the isolated paper on the back of the product and sticks it directly to the joint surface. And its life can be 5 years to the longest.
  • Brush primer on the ground: It should be applied with primer on uneven surfaces or walls(e.g., Pattex Contact Adhesive, Maxbond UL 1603HFR-HS). The amount of primer required depends on the smoothness of the bonding surface, approximately 1 kilogram per 3 to 5 square meters. Please refer to the construction instructions when using the primer.

Prev: None

Next: None

Online
Message


If you have any suggestions or feedback about our company, please fill in the relevant information on this page and submit it. Our staff will contact you in a timely manner, or please call us directly.

电话

Submit