【Line marking】Standards and application of floor marking in factory workshops_Sichuan JIangyou Yushu Yeshili Reflective Material Co.,Ltd

news center

Home page

【Line marking】Standards and application of floor marking in factory workshops

Release time：

2024-11-01

Factory markings

Many factories, workshop channel markings and production site material placement areas require ground marking planning to ensure the standardized and normalized management of various areas of the company. The ground markings planned by preformed markings have excellent characteristics such as reflective, anti-slip, and wear-resistant. In addition, they are easy to construct and remove, making them the preferred material for factory workshop markings.

Factory marking standards

01. The meaning of color
The company's workshop markings can be divided into two types: single color and double color. Single color is red, green, and yellow; double color is yellow and black, red and white.

Single color:

1. Red - mainly used in areas with unqualified quality, reminding employees to deal with these products or materials in a timely manner.

2. Green - mainly used in areas with qualified quality, reminding employees that these products or materials need further processing.

3. Yellow - mainly used in work areas, reminding employees to work safely in the area, and playing a positioning role.

Double color:

1. Yellow and black - mainly used in workshop channel marking, reminding not to occupy the channel and not to easily enter the area in the channel.

2. Red and white - mainly used in fire protection facilities, etc., red and white stripes indicate that people are prohibited from entering dangerous areas, and remind people not to block fire protection facilities.

02. Specifications of ground channel lines
1. Channel lines are used for the passage of people, vehicles and materials, and are usually solid lines.

2. Area lines are used for functional subdivision within the work area, and are generally solid lines; sometimes, for aesthetic and flexibility considerations, dotted lines can also be used; in addition, dotted lines can also be considered for areas with uncertain functions.

3. The width of the channel itself should be determined in combination with work needs and site size.

category	color	width	Area formation method
Main Channel	yellow	100mm	With the main gate as the center line, the axis is symmetrically distributed
Regional Channel	yellow	80mm
Auxiliary Channel	yellow	50mm	Sidewalks, crossings, danger zones

Preformed road marking construction steps

1. Select the landmark line of the corresponding color according to the area where the ground marking line is to be pasted;

2. Clean the ground where it needs to be pasted;

3. Draw the outline on the ground;

4. Tear the landmark line and align it with the outline and paste it on the ground;

5. Use a rubber hammer to pressurize the ground marking line to make it fit more closely to the ground.

Product Introduction

Product Name: "Color Road" Preformed Road Marking Sticker

Product Type: Reflective Marking Tape, Anti-fouling Marking Tape

Product Specifications: 5cm, 10cm, 15cm (customizable according to customer requirements)

Product Features:

1. Reflective Marking Tape

This marking tape has glass beads on the base material and surface, which has the characteristics of reflectivity, anti-skid and wear resistance.

2. Anti-fouling marking tape

This marking tape is coated with a high-performance coating on the surface, without glass beads, with good wear resistance and self-cleaning properties, and is easy to clean.

3. Anti-fouling and anti-skid marking tape

This marking tape has no glass beads on the surface and is smooth and flat, with good anti-fouling and anti-skid properties.