PRODUCTS CENTER
Permanent Anti-stain&anti-slip pavement marking tapes (Particles Surface)(KW5004 Series)
Preformed Permanent Anti-stain&anti-slip pavement marking tapes are a new type of material that features a special anti-slip layer on its surface, providing excellent skid resistance while being easy to clean. It does not contain glass beads on the surface and is composed of flexible polymer materials and other ingredients.
Temporary pre-formed line striping
电话
Product details
Product Information
Name:Permanent Anti-stain&anti-slip pavement marking tapes (Particles Surface)
Brand： Color Road
Color: white, yellow, red, blue, black, green
Product Features
- Preformed anti-slip and anti-fouling marking tape, can be manufactured into any specification as required by customers.
- No glass beads on the surface, smooth and easy to clean.
Application Scope
- Suitable for marking on various road surfaces such as concrete, asphalt, cement, marble, etc.
- Especially ideal for places with high cleanliness requirements, including supermarkets, factories, squares, etc.
- Can be made into various markings, arrows, characters, patterns, colored signs, three-dimensional signs, etc.
Service Life
- The service life is at least 1 year, depending on road conditions, traffic flow and installation.
- When used on indoor/outdoor pavements with little vehicle traffic (such as airports, workshops, exhibition halls, squares) or various wall surfaces, the service life can reach more than 2 years at normal temperature.
Product size reference chart
Customizable
Technical Parameters
Nature | Data | Unit |
Thickness | 1.35 ± 0.1 | mm |
Water resistance | Meets the requirements of GB/T 24717-2009 | -- |
Alkali resistance | -- | |
Anti-slip properties | >45 | BPN |
Abrasion resistance | Meets the requirements of GB/T 24717-2009 | -- |
Adhesion | 40 ± 5 | (N/25mm) |
Instructions:
1. The pavement marking tape without adhesive backing is commonly used in special environments and special materials, using special glue, such as two-component AB glue, 502 glue, etc.
2. The products with adhesive backing can be divided into ground brush primer and ground primer without brush according to the usage:
- Without brush primer on the ground: It can be directly applied to smooth and flat surfaces without applying primer when used indoors, on outer pavement, and various walls of place such as workshops, exhibition halls, squares, safety islands of toll stations, where few vehicles run over, it only needs rip off the isolated paper on the back of the product and sticks it directly to the joint surface. And its life can be 5 years to the longest.
- Brush primer on the ground: It should be applied with primer on uneven surfaces or walls(e.g., Neoprene Rubber Adhesive（viscosity below 1000, solid content above 30%）, Pattex Contact Adhesive, Maxbond UL 1603HFR-HS). The amount of primer required depends on the smoothness of the bonding surface, approximately 1 kilogram per 3 to 5 square meters. Please refer to the construction instructions when using the primer.
Popular products
Online
Message
If you have any suggestions or feedback about our company, please fill in the relevant information on this page and submit it. Our staff will contact you in a timely manner, or please call us directly.
电话
Sichuan JIangyou Yushu Yeshili Reflective Material Co., Ltd
Tel：0086-19113705691 0816-3366898
Fax：86-0816-3368692
E-mail：amy@scysysl.com
Alibaba：https://jyysl.en.alibaba.com/?spm=a2700.shop_cp.88.4
TAOBAO：https://shop209197429.taobao.com/
Address: No. 270, East Section of Dapeng Road, High tech Industrial Park, Jiangyou City, Sichuan Province
Copyright © 2023 Sichuan JIangyou Yushu Yeshili Reflective Material Co., Ltd
Business License | SEO