PRODUCTS CENTER

Preformed Permanent Anti-stain pavement marking tapes (Smooth Surface)(KW500 Series)
Preformed Permanent Anti-stain pavement marking tapes (Smooth Surface)(KW500 Series)
Preformed Permanent Anti-stain pavement marking tapes (Smooth Surface)(KW500 Series)

Preformed Permanent Anti-stain pavement marking tapes (Smooth Surface)(KW500 Series)

Preformed Permanent Anti-stain pavement marking tapes do not contain glass beads on the surface. It is made by combining high-performance coatings, flexible polymer, wear-resistant layer, substrate, high-strength adhesive, release film, and other materials.

关键词:

Engineered stain resistant marking tape

电话


Product details

Product Information

 

Name: Preformed Permanent Anti-stain Pavement Marking Tapes (Smooth Surface)

Brand: Cai Lu

Description:

Cai Lu preformed anti-stain marking tapes are prefabricated from high-molecular flexible polymers. They feature excellent flexibility and wear resistance. The surface is coated with high-performance coating without glass beads, making it easy to clean and resistant to dust and dirt. The bottom layer uses high-adhesion, weather-resistant adhesive for firm bonding to the ground.

Item No.: KW500
 

Product Features

  • Smooth surface without glass beads, easy to clean with good self-cleaning property
  • Excellent flexibility and weather resistance
  • Easy to install
  • Can be preformed into various markings, arrows, characters, patterns, colored signs, 3D signs, etc.
 

Scope of Application

Suitable for ground markings in supermarkets, factories, plazas and other places requiring high cleanliness.
 

Service Life

Under normal temperature, the service life can reach up to 2 years depending on pavement conditions, traffic flow and installation.

When used indoors or outdoors with little vehicle traffic (e.g. airports, workshops, exhibition halls, plazas) or on various walls, the service life can reach up to 5 years.

 

Product size reference chart

Product numberLength(M)Width(CM)Thickness(MM)Weight(±10%)Conventional packagingAdhesive
KW50050M5,10,15,20,Customizable1.0-1.5MM2.0kg/sqm260*260*400MMwithout adhesive backing

 

Technical Parameters

Nature

General data

Unit

KW500

________

Color

white

yellow

________

Thickness

1.0-1.5

mm

Water resistance

pass

________

Acid resistance

pass

________

Wear-resistant

40

mg

Minimum adhesion

25

N/25mm

Instructions:

1. The pavement marking tape without adhesive backing is commonly used in special environments and special materials, using special glue, such as two-component AB glue, 502 glue, etc.


2. The products with adhesive backing can be divided into ground brush primer and ground primer without brush according to the usage:

  • Without brush primer on the ground: It can be directly applied to smooth and flat surfaces without applying primer when used indoors, on outer pavement, and on various walls of place such as workshops, exhibition halls, squares, safety islands of toll stations, where few vehicles run over, it only needs rip off the isolated paper on the back of the product and sticks it directly to the joint surface. And its life can be 5 years to the longest.
  • Brush primer on the ground: It should be applied with primer on uneven surfaces or walls(e.g., Neoprene Rubber Adhesive(viscosity below 1000, solid content above 30%), Pattex Contact Adhesive, Maxbond UL 1603HFR-HS). The amount of primer required depends on the smoothness of the bonding surface, approximately 1 kilogram per 3 to 5 square meters. Please refer to the construction instructions when using the primer.

Online
Message


If you have any suggestions or feedback about our company, please fill in the relevant information on this page and submit it. Our staff will contact you in a timely manner, or please call us directly.

电话

Submit