PRODUCTS CENTER

Preformed Permanent Pavement Marking Tapes (Reflective Surface)(L500 Series)
Preformed Permanent Pavement Marking Tapes (Reflective Surface)(L500 Series)

Preformed Permanent Pavement Marking Tapes (Reflective Surface)(L500 Series)

Preformed Reflective Permanent Pavement Marking Tapes are a new type of road traffic marking that can be directly installed on roads. Using a special process, it combines high-refractive glass beads, wear-resistant layers, substrates, release film, and other components.

关键词:

Engineering reflective marking tape

电话


Product details

Product Information

Name: Preformed Permanent Pavement Marking Tapes (Reflective Surface)

Brand: CL

Description:Cailu Preformed Engineering‑Grade Reflective Marking Tape is a new type of reflective material made from high‑molecular flexible polymers and other raw materials, which can be directly applied to roads. Its thickness ranges from 1.3 mm to 2.1 mm.

Item No.:L50025X (Class 2 Reflectivity), L50015X (Class 1 Reflectivity)

Product Features

1.The base material and surface contain glass beads, providing excellent reflectivity and anti‑slip performance.

2.Outstanding flexibility, wear resistance and other high‑performance properties.

3.The bottom layer is equipped with high‑adhesion, weather‑resistant adhesive, ensuring firm bonding to the ground.

4.Manufactured with preformed technology for easy installation – simply apply to the surface.

Scope of Application

1.Suitable for various road surfaces (concrete, asphalt, cement, marble, etc.) and walls of different materials.

2.Can be made into various markings, arrows, characters, patterns, colored road signs, 3D signs and pipeline markers.

3.Under normal temperature conditions, the service life can reach up to 2 years, depending on road conditions, traffic volume and installation environment.

Product size reference chart

Customizable

Product 

 Length (m) 

Width (cm)

Thickness (mm) 

Weight (±10%) 

Standard Packaging

L50025X

40M

5, 10, 15, 20 (Customizable)

1.6-1.9

1.9kg/sqm 

300*300*320MM

L50015X

40M

1.4-1.7

1.9kg/sqm

300*300*320MM

Technical Indicators:

Property 

Standard Values

Unit

L50015X

L50025X

Color

White

Yellow

White

Yellow

/

Thickness

1.6-1.9

1.4-1.7

mm

Water Rrsistance

No fading, peeling, shrinking, cracking after water immersion

/

Alkali resistance

No fading, peeling,  shrinking,  cracking after Ca(OH)₂ immersion

/

Wear index

70-80

90-100

(mg)

Retroreflectivity coefficient

﹥500

300

300

200

cd/(1x·㎡)

Minimum Adhesion

25

25

N/25mm

Slip resistance

45

45

BPN

Instructions:

1. The pavement marking tape without adhesive backing is commonly used in special environments and special materials, using special glue, such as two-component AB glue, 502 glue, etc.


2. The products with adhesive backing can be divided into ground brush primer and ground primer without brush according to the usage:

  • Without brush primer on the ground: It can be directly applied to smooth and flat surfaces without applying primer when used indoors, on outer pavement, and on various walls of place such as workshops, exhibition halls, squares, safety islands of toll stations, where few vehicles run over, it only needs rip off the isolated paper on the back of the product and sticks it directly to the joint surface. And its life can be 5 years to the longest.
  • Brush primer on the ground: It should be applied with primer on uneven surfaces or walls(e.g., Neoprene Rubber Adhesive(viscosity below 1000, solid content above 30%, Pattex Contact Adhesive, Maxbond UL 1603HFR-HS). The amount of primer required depends on the smoothness of the bonding surface, approximately 1 kilogram per 3 to 5 square meters. Please refer to the construction instructions when using the primer.

Prev: None

Next: None

Online
Message


If you have any suggestions or feedback about our company, please fill in the relevant information on this page and submit it. Our staff will contact you in a timely manner, or please call us directly.

电话

Submit