PRODUCTS CENTER
Preformed Permanent anti-slip marking tapes (Particles Surface)
Preformed Permanent Pavement Marking Tapes can be made into any specification according to customer requirements
Anti-slip marking tape
电话
Product details
Product Information
Name:Preformed Permanent anti-slip marking tapes (Particles Surface)
Brand： Color Road
Colors: red, yellow, white, blue, black, green
Product Introduction
Preformed anti-slip marking tape is a new type of anti-slip material composed of anti-slip particles, wear-resistant layer, base material, adhesive and release film, with a thickness of approximately 1.35mm.
Product Features
The surface is equipped with anti-slip particles, providing excellent anti-slip and wear-resistant performance. It is a widely used anti-slip product.The marking tape can adhere to various material surfaces and can also be used independently as an anti-slip product. Its service life can reach up to 2 years under normal temperature.
Application Scope
Suitable for anti-slip treatment on stairs and other special areas in various places, such as playgrounds, entertainment venues, swimming pools, supermarkets, office buildings, factories, hotels, park greenways and other public areas.
Specifications
Standard length: 40 m per roll standard width: 10 cm, 20 cm custom sizes are available according to customer requirements.
Colors
Red, black, etc. Custom colors are available according to customer requirements.
Technical Parameters:
|
Properties |
Typical data |
Unit |
Test Methods |
|
|
Color |
white |
yellow |
________ |
________ |
|
Thickness |
1.35 ± 0.1 | 1.35 ± 0.1 |
mm |
GB/T 7125 |
|
Water resistance |
pass |
pass |
________ |
GB/ T24717 |
|
Acid resistance |
pass |
pass |
________ |
GB/T 24717 |
|
Wear-resistant |
50 |
50 |
mg |
GB/T24717 |
|
Minimum adhesion |
40 ± 5 | 40 ± 5 |
N/25mm |
GB/T24717 |
|
Anti-skid value |
＞60 |
＞60 |
BPN |
GB/T24717 |
Instructions:
1. The pavement marking tape without adhesive backing is commonly used in special environments and special materials, using special glue, such as two-component AB glue, 502 glue, etc.
2. The products with adhesive backing can be divided into ground brush primer and ground primer without brush according to the usage:
- Without brush primer on the ground: It can be directly applied to smooth and flat surfaces without applying primer when used indoors, on outer pavement, and on various walls of place such as workshops, exhibition halls, squares, safety islands of toll stations, where few vehicles run over, it only needs rip off the isolated paper on the back of the product and sticks it directly to the joint surface. And its life can be 5 years to the longest.
- Brush primer on the ground: It should be applied with primer on uneven surfaces or walls(e.g., Neoprene Rubber Adhesive（viscosity below 1000, solid content above 30%), Pattex Contact Adhesive, Maxbond UL 1603HFR-HS). The amount of primer required depends on the smoothness of the bonding surface, approximately 1 kilogram per 3 to 5 square meters. Please refer to the construction instructions when using the primer.
Popular products
Online
Message
If you have any suggestions or feedback about our company, please fill in the relevant information on this page and submit it. Our staff will contact you in a timely manner, or please call us directly.
电话
Sichuan JIangyou Yushu Yeshili Reflective Material Co., Ltd
Tel：0086-19113705691 0816-3366898
Fax：86-0816-3368692
E-mail：amy@scysysl.com
Alibaba：https://jyysl.en.alibaba.com/?spm=a2700.shop_cp.88.4
TAOBAO：https://shop209197429.taobao.com/
Address: No. 270, East Section of Dapeng Road, High tech Industrial Park, Jiangyou City, Sichuan Province
Copyright © 2023 Sichuan JIangyou Yushu Yeshili Reflective Material Co., Ltd
Business License | SEO